Im hooking up the afs gps to the expansion connector. One diagram shows drawing power from pin 1 of expansion receptacle, another shows drawing power from main cable pin 6, the old oat terminal. Is either/both correct?
Im hooking up the afs gps to the expansion connector. One diagram shows drawing power from pin 1 of expansion receptacle, another shows drawing power from main cable pin 6, the old oat terminal. Is either/both correct?
Dave Ford
RV10
http://www.advanced-flight-systems.c...al%20V3.00.pdf
Page 151 and 152
If you purchased the EFIS in the last 15 months you have rev 7 hardware (also on the P/N tag) use page 152
Rob Hickman
Advanced Flight Systems Inc.
Perfect, thanks again
Last edited by rvdave; 01-22-2015 at 07:19 PM.
Dave Ford
RV10