I have a 4500 and 3500 and a Navworx ADS600B. I connected the navworx display to the 3500 serial #3. I connected the Navworx encoder (in) to the 3500 serial #2. Can I pass data from the 4500 serial #2 (which is connected to the GTX 327 alt. enc. in) to the 3500 serial #2? Same for serial #3 (Navworx display port) on the 3500 to the 4500. OR must I connect the Navworx display port to the serial #3 on the 4500 and share the encoder out 4500 serial #2 with the GTX 327 and the Navworx box?
When configuring the Navworx box the UAT console display selection is either None or GPSMap. There is no selection for MAP TA RS232 or PROTOCOL TA. I assume GPSMap.