The ADSB button is to select a wired ADSB receiver, the wifi button is used to select an ADSB receiver that sends the adsb data on wi-fi. We have not tested a tail beacon with wi-fi, it might work.

Use Client Mode if you want the EFIS to connect to a Wi-Fi ADS-B Module that supports GDL90 data or a Wi-Fi Hotspot.

After changing the Wi-Fi mode you will need to power down and power up the EFIS for the changes to take effect.

NOTE:
You must have AF-5000 Software:Vx16.06.02-B01 or later to display nexrad weather on a sectional chart.