-
Ethernet hub issues
When my two screens are connected together with an ethernet cable, they talk to each other.
When they are connected via a hub, they do not.
My AF3500EM talks to my Wxworx XM receiver via the hub. The AF5400T does not. I am going to swap out the cable that connects the AF5400T to the hub in case it is the problem, but would welcome any other suggestions.
Last edited by Cojaken; 12-06-2018 at 06:40 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules