Looking at pin outs for sv arinc it looks like no tx-rx to efis which is where I have serial port 3 to afs arinc, how does this get configured? edit... I’m assuming arinc communicates thru network but how does ff info get to navigator?
Looking at pin outs for sv arinc it looks like no tx-rx to efis which is where I have serial port 3 to afs arinc, how does this get configured? edit... I’m assuming arinc communicates thru network but how does ff info get to navigator?
Last edited by rvdave; 10-31-2018 at 07:01 AM.
Dave Ford
RV10
The SV-ARINC module does not use any of the EFIS serial ports. If you want fuel flow to the navigator you will need to use one of the EFIS serial ports configured as EI FUEL to send the data to the IFD-540
Rob Hickman
Advanced Flight Systems Inc.
Posting Permissions
Reply With Quote