My course missed and hold patterns show on the ifd540 but do not transfer to afs5600 map page as the ifr waypoints do. Is there a setting I’m missing?
My course missed and hold patterns show on the ifd540 but do not transfer to afs5600 map page as the ifr waypoints do. Is there a setting I’m missing?
Last edited by rvdave; 10-14-2018 at 10:45 AM.
Dave Ford
RV10
Holds require an SV-ARINC-429 and the latest v15 software.
I have the arinc and just upgraded to v15, are there settings to get missed and hold patterns to appear? They are not showing, I have an ifd540.
Dave Ford
RV10
i have the same issue. Missed approach, and even procedure turns do not show up on the 5600
Rob Hickman
Advanced Flight Systems Inc.
When did you upgrade to an SV-ARINC-429? In 2016 you had an AF-ARINC module.
Didn’t realize there was an AFS vs SV arinc, what is the performance difference, is it pin for pin replacement?
Dave Ford
RV10
The conversion will require rewiring.
AF-ARINC
- AF-3/4/5000 Compatible
- Dedicated to a particular EFIS.
- Connects to a serial port
SV-ARINC-429 (AF-ACM-429 and AF-ACM-ECB has in internal SV-ARINC)
- Processes hold information
- AF-5000 R7 Compatible
- Connects to the SV-NETWORK
- Communicates with any AF-5000 R7 connected to the SV-NETWORK
- Frees up two serial ports from AF-5000 EFIS (unless you want fuel flow information fed to the IFR Nav)