I had a recent meltdown that necessitated re-creating all of my AFS settings. Through Rob's help (Thanks Rob!), I've got almost everything working. Here are 3 things that are still messed up that hopefully Shawn/Rob/Someone can provide some pointers on ...

1) The elevator trim hat control on the joystick ... Previously, this was set for Push Hat Down = nose up and Push Hat Up = nose down. This was intuitive to me (and the original builder) because it mirrors pulling back on the stick for nose up and pushing forward on the stick for nose down. Now it's set up as the reverse. I can go into SET -> CAL and find what I think is the setting interface for this, but the number "coordinates" that seem to set the up/level/down position are greyed-out / not editable. ??

2) The autopilot button on the joystick ... This is an AFS Autopilot unit with 2 buttons: AP and EFIS. Previously, the button on the underside of the stick activated the EFIS mode. Now it activates the AP mode. How can I switch that?

3) Com2 radio frequencies ... This may be connected to #2. I have a Dynon AFS navcom2. Before the meltdown, I was able to use the touch interface of my 5600 to enter/select frequencies on the PFD screen. Now, touching the displayed frequencies doesn't generate the popup interface. I can only change frequencies on this com2 using the physical buttons of the AFS radio. How can I revert back to the way it was before?

Thanks for any info!

Cheers,
Jeff