-
AFS 5600 and Non-listed transponder
Hi,
I have a Dittel KTX2 Mode-S ES transponder. It should be able to be controlled and connected to various devices through the Com port.
I have connected it to Com2, and tried all the installed transponder types but can't get it to connect.
I have most luck with AFS/Dynon where I get responses in the diagnostics ""** - Deleted** x**Deleted" - however it's not the correct response as far as I can tell.
Any thoughts ? The transponder communicates either with 4800 or 9600 Baud rates. I have tried with both rates - on 4800 nothing gets through.
I will add other images in the thread (if possible).
Last edited by PAN-Denmark; 01-08-2017 at 05:03 AM.
Reason: added details.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules