Results 1 to 5 of 5

Thread: GPS-250 and OAT - Advanced Deck 5600

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-10-2016, 03:25 AM #1
    PAN-Denmark
    PAN-Denmark is offline
    Member
    Join Date
    Oct 2016
    Location
    Copenhagen, Denmark
    Posts
    63

    GPS-250 and OAT - Advanced Deck 5600

    Hi,
    I have installed my GPS-250 on the PFD, using RS-232#4 on the EFIS Expansion connector, but sharing Pin 6 on the main cable for power. Additionally I have installed my OAT on the MFD also using Pin 6 for power and 7+19 for signal and ground.

    When the 2 displays are connected with Crossover cable, the OAT doesn't work, but when I don't have the cross-over cable in I get OAT on the MFD - as soon as I can see the connection is established the OAT goes "---" on both the MFD and PFD.

    what to do ? is this a setting or cabling issue?

    rgds
    Per A
    Copenhagen,Denmark
    RV6A - Panel upgrading.
    Last edited by PAN-Denmark; 10-10-2016 at 07:43 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules