On the 5600 PFD I am using a 496 for GPS navigation, and the AF-Pilot autopilot. I also have an Arinc429 that is all to be interconnected with the GPS data to get full functionality out of my 5600.

Garmin GPS:
If I connect the data out from the 496 to term 17 on the AF-pilot and terminal 10 on the 5600 PFD would this be correct? If I add another wire from terminal 22 on the 5600 to 7 on the AF-Pilot would this be correct?

Arinc429:
AF-pilot terminal 14 to terminal 13 on Arinc connector.
AF-Pilot terminal 15 to terminal 25 on Arinc connector.
Would these be correct?

AF-GPS:
I am also adding the new AF-GPS 73102 to my 3400 EM as a backup GPS. I notice the antenna takes it power from the OAT terminal 6 on the main cable connector. Where do I pick up the remainder of the connections for GPS data and ground?

Thanks