-
Sorry, I was looking at the wrong unit on my wiring diagram.
My NGT-9000 is wired via RS-232 from the NGT-9000 pin 64 to the AF-5500 pin 5 of the EFIS Main Connector. It works great and no wifi needed between them.
-
Thanks for the reply. I currently have pins 62 & 61 wired to pins 5 7 4 on the efis, with the wifi module installed on pins 64 & 63. How do you have the serial port set on the efis?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules