no audio

[Rob Hickman]

Lower the landing override value.

[RKURRLE]

Hi Rob

Is that a value in the calibration page under AOA? I am not at the airplane now, but will look tomorrow. What is the "landing override value"? I always like to understant the why. Thanks - Bob Kurrle

[chardks]

The landing override acts as the low speed cut-off for the audio. If this value is too high it can disable the audio while the aircraft is still flying. This setting is in Calibration under the AOA section.

[RKURRLE]

Thanks - I found it in the calibration AOA section and will lower it. _Bob