-
Advanced Flight Systems
Be sure to update to the latest software and it will automatically put the secondary display into calibration mode. I would really wait to calibrate the magnetometer when it is installed in the aircraft and in flight configuration. The display won't be able to detect any difference between install locations but if the location changes it needs to be re-calibrated.
-
Thanks - we will not calibrate until all is installed correctly and aircraft is in flight-configuration. Great that the latest software will put both in calibration mode.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules