Wind Indicator not displayed

[amekler]

i think it has to with the calculation used. on a direct cross wind there is inaccuracy so nothing is displayed
alan

[Bigglesrv7a]

I have the same issue after recently changing my internal battery on my unit. Ie All GPS data is working except for the wind information. Does anyone know if there are any precautions to using the 'Set NVRAM default from calibration menu?

Cheers, Greg

[Shawn McGinnis]

Make sure you write down your autopilot gain settings before use.

Let me know if you have any more questions that I can help with.

[Bigglesrv7a]

Thanks Shawn, I don't have an AFS auto pilot (TT Digiflight 11) so hoping all will be ok to set default. I will take a look next time I am out at the hangar. With thanks, Greg