Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Ghost traffic targets

  1. #1

    Ghost traffic targets

    I'm seeing a ton of traffic targets that don't exist. What do you need from me to help debug this issue? Also, when there are a lot of targets together on the map, it would be helpful if you grouped them together and only showed the closest one, otherwise they are all unreadable as they overlap quite a bit. It would also be nice to see altitudes on the synthetic vision display instead of just a big yellow dot. Thanks!

  2. #2
    Quote Originally Posted by brianjohnson View Post
    I'm seeing a ton of traffic targets that don't exist. What do you need from me to help debug this issue? Also, when there are a lot of targets together on the map, it would be helpful if you grouped them together and only showed the closest one, otherwise they are all unreadable as they overlap quite a bit. It would also be nice to see altitudes on the synthetic vision display instead of just a big yellow dot. Thanks!
    EFIS model?
    software version?
    ads-b receiver?
    pictures of the map screen?
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    Quote Originally Posted by Rob Hickman View Post
    EFIS model?
    software version?
    ads-b receiver?
    pictures of the map screen?
    AF-5500
    9.05.0
    iLevil
    I'll get back to you with pics as soon as I can

  4. #4
    Send us an email and we can send you the latest software to test, we are sending out 9.5.5

    We are not seeing this with other ADSB units, if the 9.5.5 software does not fix it you should check with
    Levil
    Rob Hickman
    Advanced Flight Systems Inc.

  5. #5
    Senior Member
    Join Date
    Mar 2010
    Location
    gilford, nh
    Posts
    335
    brian,
    how dies your ildvil communicate with the 5500?
    alan

  6. #6
    It has a serial out with ADSB 115K. Also, depending on the map zoom level when you are in a very congested area (KPHX) the traffic targets make the map unreadable. I suggest that you group them together so they don't overlap and only show the altitude of the nearest target.

    Quote Originally Posted by amekler View Post
    brian,
    how dies your ildvil communicate with the 5500?
    alan

  7. #7
    Senior Member
    Join Date
    Mar 2010
    Location
    gilford, nh
    Posts
    335
    i'm looking at my ildvil. i see a usb -b port. is that what you connected to a serial port on the 5500?
    Would it work on a 4500?
    I currently use the ildvil for xavion.

    Alan

  8. #8
    No, you need to use the serial port. The pinouts are listed on the unit itself.

    Quote Originally Posted by amekler View Post
    i'm looking at my ildvil. i see a usb -b port. is that what you connected to a serial port on the 5500?
    Would it work on a 4500?
    I currently use the ildvil for xavion.

    Alan

  9. #9
    Senior Member
    Join Date
    Mar 2010
    Location
    gilford, nh
    Posts
    335
    iis it the audio jack in the front near the on off?
    alan

  10. #10
    Senior Member
    Join Date
    Mar 2010
    Location
    gilford, nh
    Posts
    335
    brian, i have the sw model not the aw model
    alan

Similar Threads

  1. ADS-B traffic symbols
    By jkgoblue in forum ADS-B
    Replies: 18
    Last Post: 06-22-2016, 01:19 PM
  2. ADS-B Traffic +/-
    By DickF in forum ADS-B
    Replies: 3
    Last Post: 05-13-2016, 07:53 PM
  3. Air to air traffic
    By rvdave in forum ADS-B
    Replies: 3
    Last Post: 10-28-2015, 11:29 AM
  4. Traffic alerts
    By dougweil in forum ADS-B
    Replies: 4
    Last Post: 01-11-2015, 08:01 AM
  5. Traffic lag on map
    By RKURRLE in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 1
    Last Post: 07-03-2012, 09:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •