Since getting together with Dynon, I have a question about the AHRS unit. Is anything changing, in regard to the AHRS to be used with the AF-5000 products?

I'm getting ready to rivet the top aft fuselage skin in place, right behind the baggage area on my RV-7A tipup. I'd like to have everything in place back there before I do that. I built a shelf to hold the AHRS unit, with room for a future second one, and drilled it for the footprint of the AHRS unit. I also ran the wire from the panel and installed the connector. Ideally, all I will have to do us insert the unit and plug it in. But before I rivet that skin on, I wanted to check and see if any changes have happened since merging with Dynon, or if any are in the works that I should know about? Thanks so much.