Hi Rob
I have a 4500 EFIS and a 3400 EM and just installed a New Navworx ADS600-BG.
The display connections are attached to the 3400 EM serial port 3.
The altitude encoder is attached to the 3400 EM serial port 2.
Both the 4500 and 3400 are synthetic displays.
The UAT Console software from Navworx replied READY FOR FLIGHT after programing. Could not test fly because of weather.
Are the following port settings correct for the display of traffic and weather with the following equipment?
Garmin 426, Garmin Sl-30 and SL-40, Garmin 327, AF auto pilot, AFS ARINC 429.
The 4500 serial ports are configured as follows.
Serial port #1 function is (AFS GPS)
Serial port #2 function is (TRFC/ICARUS)
Serial port #3 function is SL-30
Serial port #4 function is ARINC
The 3400 serial ports are configured as follows.
Serial port #1 function is (DISABLED)
Serial port #2 function is (TRFC/ICARUS)
Serial port #3 function is (DISABLED)
Serial port #4 function is (DISABLED)
Don