Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Af 3500

  1. #11
    Quote Originally Posted by Surfboy View Post
    My 3500 does not have Synthetic vision
    the clock seems to be good and then all of a sudden it loses time.
    Is there a seperate battery and if so where is it situated?
    http://www.advanced-flight-systems.c...uot-S-quot-CPU
    Rob Hickman
    Advanced Flight Systems Inc.

  2. #12
    Quote Originally Posted by Rob Hickman View Post
    Each gauge has a top yellow and red band and then a bottom yellow and red band.

    Are you pressing save after entering the values?


    1. Max (Top of Gauge) 1500.0
    2. Red High At 1500.0
    3. Yellow High At 1450.0
    4. Yellow Low At 0.0
    5. Red Low At 0.0
    6. Min (Bottom of Gauge) 1000.0


    These settings turn off the bottom yellow and red bands.
    Rob thanks for that............very informative especially the diagram
    If the Red High is at 1500 then surely i must make the Max (Top of gauge) higher than that say 1600?

  3. #13
    Quote Originally Posted by Surfboy View Post
    Rob thanks for that............very informative especially the diagram
    If the Red High is at 1500 then surely i must make the Max (Top of gauge) higher than that say 1600?
    I seriously doubt that you will ever see EGT temps over 1500, so why waste graph resolution for a range you will never operate in? If you leave it max at 1500 it will still turn red at 1500 and give you a warning.
    Rob Hickman
    Advanced Flight Systems Inc.

  4. #14

  5. #15
    Quote Originally Posted by Rob Hickman View Post
    Do you have an "S" CPU with Synthetic vision?

    The older AF-3500 EFIS screens without Synthetic vision have a clock battery under the small top cover.

    Is the OAT working? without OAT you will not get winds.
    Sorry I do have synthetic vision but just don't have 3D
    Also don't have gps but I have backup battery
    The clock looses time badly
    Any ideas how to rectify this?

  6. #16
    Sorry I do have synthetic vision but just don't have 3D

    Synthetic Vision is 3D, what is the S/N for the EFIS screen?
    Rob Hickman
    Advanced Flight Systems Inc.

  7. #17
    Quote Originally Posted by Surfboy View Post
    3500 model
    the clock seems to be good and then all of a sudden it loses time.
    Is there a seperate battery and if so where is it situated?
    Took the unit out and found the battery on the back of the unit and replaced the battery and now all good.
    Very stoked

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •