Results 1 to 1 of 1

Thread: Dynon Heated Pitot Ground

  1. #1

    Dynon Heated Pitot Ground

    [Sorry this was posted to the wrong topic but I can't fix it]

    Installing a new Dynon heated pitot assembly as part of an HDX upgrade that includes an ACM.

    To connect the black ground wire, according to the ACM installation manual, pg127: "Black Ground #14 Locally grounded using ring terminal".

    This goes against the Dynon pitot installation manual which specifically states:

    Do not connect the Black (Ground) wire to the airframe as a Ground connection.
    Doing so will introduce high currents (10A) into the airframe. This can introduce a
    significant voltage drop, and potentially cause engine instrumentation, avionics,
    and audio system electrical problems.


    What's the proper procedure for grounding the assembly?
    Last edited by kcavallo; 03-25-2024 at 07:19 AM. Reason: Posted to the wrong topic

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •