Results 1 to 3 of 3

Thread: Angle, angle push, even after landing

  1. #1

    Angle, angle push, even after landing

    I took the time finally to calibrate the AOA Sport in my plane this afternoon. I have been flying the plane with the CB pulled all of this time because I didn't have time to do the calibration.

    Anyway, the AOA seemed to work fine until after I landed with full flaps and on flare and as I rolled down the runway to enter upcoming taxiway the AOA kept barking "Angle, angle, push." I raised the flaps, no change. I ended up pulling the breaker again.

    So, is this a calibration issue that I didn't do correctly or is this an installation problem?

    Thank you!

  2. #2
    Do another hangar calibration and you might need to do another flight calibration.
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    Isn't there just a value airspeed that you can set to eliminate aoa on landing?

Similar Threads

  1. Landing Gear Advisory Bug
    By beaugeste in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 08-24-2013, 03:21 PM
  2. AOA for landing and taxi light installation
    By TClinton in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 3
    Last Post: 11-22-2010, 10:14 AM
  3. Bank Angle Indication question
    By chuckwn2 in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 2
    Last Post: 04-22-2010, 08:22 AM
  4. Disabling Landing gear switch for fixed gear
    By recapen in forum Installation Questions
    Replies: 1
    Last Post: 04-09-2010, 01:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts