Results 1 to 2 of 2

Thread: CRS default

  1. #1

    CRS default

    I'm helping a friend with his 5600 install in a Rocket. He has a 430 as the only radio (thanks for the great help on the phone). When you fire
    up the EFIS, the default CRS setting is Auto, which always displays a green VOR needle on the EFIS. In order to get the Magenta GPS needle
    you must press CRS then select GPS. Is there any way to make the defualt the GPS and not the VOR needle?

    Thanks,

    Tom Prokop

  2. #2
    Press the CDI button on your 430W, in auto mode it follows the 430W CDI button.
    Rob Hickman
    Advanced Flight Systems Inc.

Similar Threads

  1. 5600 default heading error
    By BOB BARROW in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 12-18-2014, 10:22 AM
  2. Default boot-up page
    By dnelson in forum EFIS Installation Questions
    Replies: 2
    Last Post: 09-06-2011, 09:43 AM
  3. Default AOA settings on the 4500 for selected aircraft type
    By kbehrent in forum General Discussion
    Replies: 1
    Last Post: 08-24-2011, 08:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •