Results 1 to 7 of 7

Thread: Dynon pitot/aoa & afs

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Dynon pitot/aoa & afs

    I have a dynon pitot/aoa probe that came with the kit I purchased but no controller. What do I need to integrate with my future 5600 purchase?

  2. #2
    It sounds like it is a non heated probe, it should work with the EFIS.
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    Oh, it is a heated probe, I was just wondering about controlling and inputting aoa data from the dynon probe to afs efis .

    Dave

  4. #4
    The Dynon heated Pitot comes with the controller. You can connect the AOA port to the EFIS lower wing AOA port and it should work.
    Rob Hickman
    Advanced Flight Systems Inc.

  5. #5

  6. #6

    Wing ports vs Dynon pitot

    When building, what are the pros/cons of the Dynon pitot AOA vs the old style wing pressure ports? Planning an AFS panel and I want to make the choice during the wing build.
    Thx,
    -Dan

Similar Threads

  1. 3500 non s, pitot AOA
    By ricgc in forum Installation Questions
    Replies: 5
    Last Post: 07-15-2016, 08:08 AM
  2. ASI calibration/pitot checkout
    By rv8iator in forum AF-5600 & AF-5500 General Discussion
    Replies: 4
    Last Post: 11-05-2013, 11:13 AM
  3. ASI and pitot checkout
    By rv8iator in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 0
    Last Post: 11-03-2013, 01:28 PM
  4. Pitot Failure
    By rleffler in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 5
    Last Post: 12-08-2011, 11:06 PM
  5. Gretz Heated Pitot
    By SDClark in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 3
    Last Post: 01-25-2011, 11:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •