VPX pro support

[hackmo15]

I have a AFS 5600 interfaced with VPX pro. The "flaps" text has disappeared . the line on the efis screen in the elec page still indicates current and status in the box below, but no identifying text.
Suggestions?
JH

[Rob Hickman]

What version of software are you running? Does the flaps display still work?

[nickm]

A system update (on the VPX side) caused the VPX to stop sending the FLAP and TRIM labels for these pins. We caught this a while back and a fix is in place in version 9.4.68 and latter.

[hackmo15]

I'm running 9.4.66 for software. The flaps and trim all work as expected except no "flaps" label on the line it belongs.

[Rob Hickman]

You are running 9.4.66 and it was fixed in 9.4.68 Send an email to support and we will get you the latest software.

[rleffler]

You are running 9.4.66 and it was fixed in 9.4.68 Send an email to support and we will get you the latest software.

Are software updates not being posted to the web anymore? The support page indicates 8.17.... for the 5000 and 8.08.... for the 4500.

I don't have a problem with emailing support. I was just programmed to check the web page periodically.

[Rob Hickman]

The latest 4500 code is posted, we are working on a new release to post for the AF-5000 system.