Results 1 to 2 of 2

Thread: RV8 port locations

  1. #1

    RV8 port locations

    I'm installing the AOA ports in my RV8 wing. The installation manual lists the chord wise location as: "6" forward of the wing skin break at the spar about 12" aft of the leading edge". These measurements conflict slightly. If I measure 12" from the leading edge along the chord line, I get a measurement of 6-3/8" from the wing skin break on the top and 6-1/2" on the bottom.

    So, can someone clear this up for me. Should I just measure 6" from the skin break on both the top and bottom?

    Thanks,

    Chris

  2. #2
    Use the 6" from the skin break.
    Rob Hickman
    Advanced Flight Systems Inc.

Similar Threads

  1. Serial port choices
    By MarkM in forum EFIS Installation Questions
    Replies: 12
    Last Post: 05-22-2019, 03:33 AM
  2. Serial port combined functions, or port expander
    By jwyatt in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 15
    Last Post: 05-24-2013, 11:08 AM
  3. AOA Sensing Port Locations
    By cka357 in forum Installation Questions
    Replies: 2
    Last Post: 11-06-2012, 03:23 PM
  4. Serial Port Documentation
    By rleffler in forum EFIS Installation Questions
    Replies: 2
    Last Post: 10-05-2011, 04:23 PM
  5. AF4500 Serial Port 3
    By davehead in forum EFIS Installation Questions
    Replies: 1
    Last Post: 09-24-2010, 01:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •