Results 1 to 2 of 2

Thread: ZAON XRX input with all 4 serial ports already used on AFS5600.

  1. #1

    ZAON XRX input with all 4 serial ports already used on AFS5600.

    Hi.
    I have a single screen AFS 5600 in my RV7. I will have AFS-GPS on serial port #4
    I will have AFS-Pilot Autopilot on serial port # 2 I will have AF-ARINC module on serial port #3 I will have Garmin GTN 650 on serial port #1

    I want to use a ZAON XRX for traffic display on the AFS 5600 as I am not in USA for TIS input.
    How can I connect The ZAON when all the serial ports are already used?
    Can I piggy back more than one input on a serial port and which serial port would you piggyback with for the ZAON?
    Can you plug the ZAON into one of the USB ports?
    Regards Morris.

  2. #2
    With a single screen your only option is to not wire the AP to the EFIS to free up a serial port. The AP will still follow the EFIS using the ARINC module, you will have to press the EFIS button on the AP to turn it on.
    Rob Hickman
    Advanced Flight Systems Inc.

Similar Threads

  1. Serial ports
    By rvdave in forum EFIS Installation Questions
    Replies: 4
    Last Post: 01-08-2015, 09:33 AM
  2. ADS600B to 3500 serial ports
    By rv8iator in forum ADS-B
    Replies: 6
    Last Post: 01-05-2015, 11:10 AM
  3. transponder/altitude serial ports
    By Phillip in forum AF-5600 & AF-5500 General Discussion
    Replies: 5
    Last Post: 05-28-2014, 12:27 PM
  4. AF-5200 as a second screen -- serial ports?
    By ssonixx in forum AF-5600 & AF-5500 General Discussion
    Replies: 10
    Last Post: 05-05-2013, 06:49 PM
  5. Serial Ports
    By R7237 in forum Installation Questions
    Replies: 1
    Last Post: 12-27-2012, 08:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •