Results 1 to 3 of 3

Thread: AOA Sensing Port Locations

  1. #1
    Junior Member
    Join Date
    Oct 2012
    Location
    Richmond, KY
    Posts
    2

    Question AOA Sensing Port Locations

    I'm building a Vans RV-7. The measurements for the port locations (4.75 for top and 7.5 for lower) interfere with an access hatch that I previously installed in the left lower wing skin. Is it possible to move both the sensors by 2 inches to the inboard direction while keeping the same chord line measurement? The new measurements would be 6.75 for the top and 9.5 for the bottom.

    Thanks,
    Chuck
    Chuck Anderson
    Richmond, Ky
    RV-7 In Process

  2. #2
    Yes, should not be a problem.
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    Junior Member
    Join Date
    Oct 2012
    Location
    Richmond, KY
    Posts
    2

    Thumbs up AOA Sensing Port Locations

    Thanks Rob!

    Worked out great.

    Chuck
    Chuck Anderson
    Richmond, Ky
    RV-7 In Process

Similar Threads

  1. Serial port choices
    By MarkM in forum EFIS Installation Questions
    Replies: 12
    Last Post: 05-22-2019, 03:33 AM
  2. Alternator Current Sensing on 3500
    By timotb in forum AF-3400, AF-3500 ... General Discussion
    Replies: 3
    Last Post: 10-22-2013, 08:32 AM
  3. Serial port combined functions, or port expander
    By jwyatt in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 15
    Last Post: 05-24-2013, 11:08 AM
  4. RV8 port locations
    By cmwelsh in forum Installation Questions
    Replies: 1
    Last Post: 05-02-2013, 07:37 AM
  5. Flaps Position Sensing
    By davehead in forum EFIS Installation Questions
    Replies: 1
    Last Post: 01-17-2011, 08:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •