Results 1 to 3 of 3

Thread: arinc adapter

  1. #1

    arinc adapter

    Is there any reason NOT to mount the arinc adapter to the side of the AF-4500 (opposite side from the fan)? w/ Psa/velcro attachment.

  2. #2
    Should be ok
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    Hi rv8iator,

    I mounted the ARINC adapter to the bottom of the AF4500 using two thin strips of 3M Marine Velcro and it has worked great for the last 100+ hours. I can still slide the unit w/ the ARINC adapter in/out of the bezel. You may want to see/confirm if it's doable w/ it on the side.

    I chose this particular Velcro because the adhesive that is used is impressive to say the least. I've used it in the past on a motorcycle to hold a GPS in place which is now going on for about 13 years. It's not cheap but it is good. I found it at West Marine.

    /\/elson

Similar Threads

  1. Using Dynon capacitive sender adapter with AF-2500
    By drholling in forum General Discussion
    Replies: 3
    Last Post: 01-27-2016, 03:17 PM
  2. wi-fi adapter
    By amekler in forum AF-5600 & AF-5500 General Discussion
    Replies: 8
    Last Post: 05-22-2015, 08:33 AM
  3. AF-Pilot without ARINC-Adapter?
    By Mgeiss in forum General Discussion
    Replies: 3
    Last Post: 05-07-2012, 11:03 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •