Results 1 to 2 of 2

Thread: Serial Port 3 External AHRS

  1. #1
    Junior Member
    Join Date
    Apr 2010
    Location
    Ponte Vedra Beach FL, Point Pleasant Beach NJ
    Posts
    22

    Serial Port 3 External AHRS

    On page 46 of the 3500 Manual there is a Serial Port #3 function for Ext. AHRS - Dynon AHRS. Can I take the serial output from the D100 to function as a back up AHRS to my AFS boxes? Are there a set up instructions for this anywhere? ( for the Dynon output as well?)

    Thanks
    Frank

  2. #2
    Hi Frank,

    It cannot be used as a backup AHRS. It can only be used as the primary AHRS.
    ---
    Trevor Conroy
    Technical Support
    Advanced Flight Systems
    Support@Advanced-Flight-Systems.com

Similar Threads

  1. Serial port choices
    By MarkM in forum EFIS Installation Questions
    Replies: 12
    Last Post: 05-22-2019, 03:33 AM
  2. External Serial hardware
    By Captain Morgan in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 02-25-2015, 12:07 PM
  3. Serial port combined functions, or port expander
    By jwyatt in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 15
    Last Post: 05-24-2013, 11:08 AM
  4. Serial Port Documentation
    By rleffler in forum EFIS Installation Questions
    Replies: 2
    Last Post: 10-05-2011, 04:23 PM
  5. AF4500 Serial Port 3
    By davehead in forum EFIS Installation Questions
    Replies: 1
    Last Post: 09-24-2010, 01:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •