Results 1 to 3 of 3

Thread: Interfacing to TT Digiflight II Autopilot

  1. #1

    Interfacing to TT Digiflight II Autopilot

    What setting should I use on the serial port page to output GPS/NMEA at 4800 baud on serial 4 to a TruTrack Digiflight IIVS autopilot?

    Is there anyway to get the autopilot to follow the heading bug, or does that require an ARINC interface?

    Peter

  2. #2
    It will only output 9600 Aviation format, that should work for the AP. You need an ARINC and a VSG AP to follow the heading bug.
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    Rob, thanks, setting to AVTN/AVTN, and the baud on the AP to 9600 has solved the problem. Peter

Similar Threads

  1. Interfacing with Becker COM/XPDR?
    By SchoolStreetDesign in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 1
    Last Post: 11-01-2012, 02:57 PM
  2. gps out to autopilot?
    By dhall_polo in forum AF-5600 & AF-5500 General Discussion
    Replies: 4
    Last Post: 03-22-2012, 10:19 PM
  3. Interfacing 3400sEE with S-Tec 30 AP
    By recapen in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 8
    Last Post: 03-10-2012, 12:14 PM
  4. TruTrak Digiflight and Sorcerer Autopilot Software Versions
    By Trevor Conroy in forum Technical Support Documents
    Replies: 0
    Last Post: 09-14-2010, 03:14 PM
  5. Same Features As Digiflight II VSGV?
    By schmoboy in forum General Discussion
    Replies: 3
    Last Post: 05-04-2010, 08:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •