Results 1 to 3 of 3

Thread: AOA micro switch

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    AOA micro switch

    I am using the Ray Allen POS12 flap position sensor on the flap tube on our F1 Rocket. Some people are saying that we do not need the supplied micro-switch that came with the AOA installation kit. Can someone explain how to use the POS12 to tell the AFS 4500 that the flaps are past 1/3 so I don't need to install the micro-switch. Maybe this is not possible??? Thanks, Tony

  2. #2
    In the EFIS AOA calibration settings menu there is a "USE FLAP ANGLE SENSOR" setting.
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3

Similar Threads

  1. Micro ad card
    By stickandrudderman in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 2
    Last Post: 08-16-2016, 05:27 AM
  2. AOA Pro Flaps Switch
    By curieroy in forum Installation Questions
    Replies: 5
    Last Post: 04-10-2015, 12:42 PM
  3. AOA switch
    By rvdave in forum EFIS Installation Questions
    Replies: 1
    Last Post: 01-12-2015, 06:19 AM
  4. Flap Switch & Audio
    By Angier Ames in forum Installation Questions
    Replies: 1
    Last Post: 03-26-2012, 03:44 PM
  5. Source Switch(es)
    By NoahF in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 8
    Last Post: 05-03-2010, 04:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •