Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Release AF4000VS80622-MV15-AV40.zip Changes?

  1. #1

    Release AF4000VS80622-MV15-AV40.zip Changes?

    Any info on what's new with the 2 Mar 12 release?

    Ron

  2. #2

  3. #3
    Alan, that link appears to lead to the last update and not the new March 2012 update. John

  4. #4
    Senior Member
    Join Date
    Mar 2010
    Location
    gilford, nh
    Posts
    335
    Quote Originally Posted by Mastro View Post
    Alan, that link appears to lead to the last update and not the new March 2012 update. John
    John,
    You are right. I don't see what the new upsdate has. I just installed it but don't see any obvious changes.
    Alan

  5. #5
    I was hoping this update was going to make the 4500 get some of those 5000 options. Like the A/P ON & HDG or LAT nav arm feature above the HDG indicator.

    I have to get this update installed and check it out!

    Let me know if you find anything Alan.

    John

  6. #6
    I will get Ken to post the changes on Monday, it does not have the new A/P features in it.
    Rob Hickman
    Advanced Flight Systems Inc.

  7. #7
    Here are the changes from 8.06.09 to 8.06.22
    • Changed flight plan transitions to use 2 degrees instead of 3.
    • Fixed OBS setting issue when done on MFD displays.
    • Added Vertical tick marks on roll scale to indicate level flight.
    • Added S-TEC autopilot mode for Version 4.0 ARINC.
    • Changed Fadec to use AFS sensors for manifold, fuel psi, oil psi, oil temp and carb temp when detected.
    • Fixed some minor CDI user selection and network overwrite issues.
    • Fixed Bearing needle on 6-pack page.
    • Fixed Bearing mode selection not following CDI mode.
    • Added Coolant temp in place of tach time on main screen when enabled.
    • Fixed some airspace drawing issues found around Sea-Tac.
    • Added previous version checking to install to prevent potential upgrade problems.
    • Increased the slip ball filtering for the Type 2 AHRS.
    • Removed an extra step from the Type 2 AHRS magnetometer calibration process.
    • Fixed SVN roll mismatch problem.
    • Added a push-and-hold to zero the range values in calibration.
    • VPX Pro/Sport fix that periodically refreshes pin configuration to accommodate different start up timings.
    Rob Hickman
    Advanced Flight Systems Inc.

  8. #8
    I have ver 4.0 ARINC and I had installed this upgrade prior to my tests the other day.
    More details please on the S-Tec autopilot mode.

    I think I may be getting conflicting answers - that's why i want more info on the S-Tec ARINC update.
    Last edited by recapen; 03-06-2012 at 05:30 AM.

  9. #9
    Quote Originally Posted by Rob Hickman View Post
    I will get Ken to post the changes on Monday, it does not have the new A/P features in it.
    Yes, it would be nice to have the latest release notes on the same page where the update is located. The last version on that page has release 8.3.28 which is from April of 2011!
    John Kazickas
    Sands Point, NY
    Glasair Sportsman N9GZ

  10. #10
    ARINC version 4.0 is the current version for all AFS platforms.

Similar Threads

  1. Af4000vs8.07.10-mv15
    By amekler in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 4
    Last Post: 02-20-2013, 05:49 PM
  2. AF-4000s Software Release Notes
    By Rob Hickman in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 3
    Last Post: 08-31-2012, 11:16 AM
  3. AF-5000 Software Release Notes
    By Rob Hickman in forum AF-5600 & AF-5500 General Discussion
    Replies: 0
    Last Post: 08-29-2012, 10:55 AM
  4. Release Notes
    By rleffler in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 1
    Last Post: 09-06-2011, 08:54 AM
  5. Release Notes
    By sjjonesnz in forum AF-3400, AF-3500 ... General Discussion
    Replies: 8
    Last Post: 10-06-2010, 02:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •