Rob,
I have noticied I lose 100 ft or more while in a turn and once wings level altitude corrrects. Is this an adjustment for this?
Alan
Rob,
I have noticied I lose 100 ft or more while in a turn and once wings level altitude corrrects. Is this an adjustment for this?
Alan
The Static Lag adjsutment in the AP can make this worse, you might try lowering it.
Increasing the EFIS ALT gain should also help, if it gets too high it will overshoot when moving to the altitude bug.
Rob Hickman
Advanced Flight Systems Inc.
Your only choice for the static lag is 0,1, or 2
Rob Hickman
Advanced Flight Systems Inc.
ok will try it.
alan
Alan, would appreciate knowing how this issue worked out for you. Thanks.
Ron,
despite trying what was suggested i still loose altitude in a turn and it corrects.
alan
Did the static lag make any difference?
How much are you losing?
Do you have autotrim?
Rob Hickman
Advanced Flight Systems Inc.
did not notice any difference with the static lag. usually lose 100 ft in a turn. it corrects after the turn but not in the turn???
yes have autotrim.
alan
Alan, what version of software do you have in the AP? What kind of bank angle are you seeing during turns?
Lucas
Trutrak Tech Support