Results 1 to 10 of 13

Thread: Serial port choices

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    I finally made my first flight three weeks ago. For the first five flights, my transponder displayed the correct pressure altitude. During the last four flights, the transponder showed an up or down arrow if I was climbing or descending, but the altitude only shows the initial field elevation, i.e. FL009. Serial port 1 is set to AVTN/ICARUS.Is there a way to see the output on the serial port to see what the 4500 is sending to the GTX?
    Last edited by MarkM; 05-26-2018 at 07:10 PM. Reason: Additional info added

Similar Threads

  1. EFIS pins 11,12,23,24 Serial port 0?
    By jcaplins in forum EFIS Installation Questions
    Replies: 3
    Last Post: 01-26-2015, 04:25 AM
  2. Serial port combined functions, or port expander
    By jwyatt in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 15
    Last Post: 05-24-2013, 11:08 AM
  3. Serial Port Documentation
    By rleffler in forum EFIS Installation Questions
    Replies: 2
    Last Post: 10-05-2011, 04:23 PM
  4. GPS connected to Serial Port on AF-3500sMFD?
    By shuttle in forum EFIS Installation Questions
    Replies: 6
    Last Post: 10-21-2010, 02:02 PM
  5. AF4500 Serial Port 3
    By davehead in forum EFIS Installation Questions
    Replies: 1
    Last Post: 09-24-2010, 01:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •