Results 1 to 5 of 5

Thread: Fuel Pump Light

  1. #1

    Fuel Pump Light

    I plan on putting a switch on my stick grip to turn on/off my fuel pump through a vertical Power VP-X Pro. Since there isn't a visual cue (the physical position of the switch) to tell me if the pump is on or not, does the VP-X/4500 interface have the capability to display a message or symbol on the screen that can be associated with a switch to tell me if a particular switch is on?

    Is this a question for the VP-X folks?

    Thank
    Last edited by MarkM; 11-02-2011 at 07:22 PM. Reason: Clarification

  2. #2
    You could use one of the 3 input on the EFIS to display on the screen when the switch is on.
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    Just what I was looking for. Thanks.

  4. #4
    Where will this show up on the screen? and are we able to change the appearance of the lettering/icon?
    Thanks

  5. #5
    Between the heading and altitude tape, you can only change the text.
    Rob Hickman
    Advanced Flight Systems Inc.

Similar Threads

  1. Adsb unit light
    By rvdave in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 02-14-2016, 01:38 PM
  2. Light Speed RPM Connections
    By jetempleton in forum EFIS Installation Questions
    Replies: 9
    Last Post: 06-18-2015, 12:28 PM
  3. Switched Inputs on dual 4500s and single Alarm light
    By kbehrent in forum EFIS Installation Questions
    Replies: 10
    Last Post: 08-16-2011, 08:21 AM
  4. AOA for landing and taxi light installation
    By TClinton in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 3
    Last Post: 11-22-2010, 10:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •