Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Pre-installed AOA data

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Pre-installed AOA data

    Hi Trevor,

    How can I tell if the pre-installed AOA data on a 4500 is for an RV-7A?

    Thank you,
    /\/elson

  2. #2
    Anybody home?

  3. #3
    RV-4, 6, 7, 8 Data

    ZERO_LIFT_CRUISE, 67

    PERFORMANCE_CRUISE, 680

    APPROACH_CRUISE, 884

    WARNING_CRUISE, 1242

    CRITICAL_ANGLE_CRUISE, 1650

    ZERO_LIFT_LANDING, -175

    PERFORMANCE_LANDING, 599

    APPROACH_LANDING, 779

    WARNING_LANDING, 1310

    CRITICAL_ANGLE_LANDING, 1826

    AOA_AUDIO, 1

    AOA_ENABLE, 1

    LANDING_OVERRIDE, 80

    USE_FLAP_ANGLE_SENSOR, 0

    CRITICAL_AOA, 150

    DECLUTTER_SEGMENT, 8
    Rob Hickman
    Advanced Flight Systems Inc.

  4. #4
    Rob,

    Can you provide the same data for the RV-10? Thanks

  5. #5
    Thank you, Rob.

  6. #6
    Junior Member
    Join Date
    Mar 2010
    Location
    Boynton Beach, Florida
    Posts
    28
    Ditto :^) --smiley face added to get up to ten characters required for post......

    Quote Originally Posted by Jim Berry View Post
    Rob,

    Can you provide the same data for the RV-10? Thanks

  7. #7
    I have verified my setting are preloaded, however I have 3 parameters that are different. It is an RV7A.

    My Zero lift setting is 68 (not 67)

    My Landing Override is 8.0 (not 80)

    My Critical AOA is is 15.0 (not 150)

    The zero lift setting is close, the others are an order of magnitude off. Is this just a newer set of numbers or do I need to change to those to your posted settings?

    Thanks

    Roger

    Quote Originally Posted by Rob Hickman View Post
    RV-4, 6, 7, 8 Data

    ZERO_LIFT_CRUISE, 67

    PERFORMANCE_CRUISE, 680

    APPROACH_CRUISE, 884

    WARNING_CRUISE, 1242

    CRITICAL_ANGLE_CRUISE, 1650

    ZERO_LIFT_LANDING, -175

    PERFORMANCE_LANDING, 599

    APPROACH_LANDING, 779

    WARNING_LANDING, 1310

    CRITICAL_ANGLE_LANDING, 1826

    AOA_AUDIO, 1

    AOA_ENABLE, 1

    LANDING_OVERRIDE, 80

    USE_FLAP_ANGLE_SENSOR, 0

    CRITICAL_AOA, 150

    DECLUTTER_SEGMENT, 8

  8. #8
    My Zero lift setting is 68 (not 67) Close enough

    My Landing Override is 8.0 (not 80) 80 in the file is 8.0 on the screen it gets divided by 10

    My Critical AOA is is 15.0 (not 150) 150 in the file is 15.0 on the screen it gets divided by 10
    Rob Hickman
    Advanced Flight Systems Inc.

  9. #9
    Rob,

    Thanks for the quick reply.

    BTW, my plane is red where the port decals go, amazingly close to the color of your decals - not much contrast at all. Do you have them in other colors like white that I can buy?

    Quote Originally Posted by Rob Hickman View Post
    My Zero lift setting is 68 (not 67) Close enough

    My Landing Override is 8.0 (not 80) 80 in the file is 8.0 on the screen it gets divided by 10

    My Critical AOA is is 15.0 (not 150) 150 in the file is 15.0 on the screen it gets divided by 10

  10. #10
    The default preload for my RV-8 feels better then after the calibration. How can I load the settings listed above to get back to the factory configuration?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •