Results 1 to 2 of 2

Thread: AF-Pilot User Document

  1. #1

    AF-Pilot User Document

    Is there a User Document for the new AF-Pilot that show/describes the screens/buttons other than what Tru-Trak has for the plain DigiTrakII?

    I see that the EFIS button has replaced the Mode button and the AP replaced the ALT. How does one get into ALT Hold mode? Does the new AP button require you to scroll through a list of options now to select ALT or VSI Holds?

  2. #2
    I'll try to help out here. First, I apologize for there not being a specific manual for the AFS AP. We have a lot of stuff going on with new products and such and it just hasn't made it to the front burner at this time.

    To engage just ALT HOLD mode, press the AP button. This puts the AP in track mode and Alt Hold. If your are climbing it will hold that vertical speed. Pushing the EFIS button puts full control of the AP in the hands of the AFS EFIS system.

    I hope this helps. Rob, just trying to help out!
    Lucas
    Trutrak Tech Support

Similar Threads

  1. User defined waypoints/airports
    By Karaka29211 in forum Map Database
    Replies: 7
    Last Post: 09-14-2017, 01:13 PM
  2. User-defined waypoints
    By danbenua in forum AF-5600 & AF-5500 General Discussion
    Replies: 4
    Last Post: 06-02-2012, 07:04 PM
  3. Error in document: 430W-EFIS-Autopilot-ARINC Interface Troubleshooting
    By NoahF in forum Technical Support Documents
    Replies: 9
    Last Post: 12-28-2010, 07:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •