Results 1 to 2 of 2

Thread: Flap Switch Needed If Using POS-12 With AF-4500?

  1. #1

    Flap Switch Needed If Using POS-12 With AF-4500?

    Sorry, ignore. I found this thread.

    I've seen reference on other forums that the flap switch is not needed for the AOA option included with the AF-4500 if a POS-12 is feeding flap position to the EFIS. Is this correct?

    Thanks!
    Last edited by schmoboy; 06-10-2011 at 08:47 AM.

  2. #2
    yes, switch is not needed.

Similar Threads

  1. What's needed to convert to using Kavlico sensors for a 4500?
    By dnelson in forum Engine Sensor Installation Questions
    Replies: 4
    Last Post: 04-19-2015, 10:46 AM
  2. Flap Switch & Audio
    By Angier Ames in forum Installation Questions
    Replies: 1
    Last Post: 03-26-2012, 03:44 PM
  3. flap switch location and use
    By progress in forum General Discussion
    Replies: 5
    Last Post: 03-17-2011, 01:48 PM
  4. AOA Flap Position Switch
    By NoahF in forum EFIS Installation Questions
    Replies: 1
    Last Post: 09-29-2010, 10:01 AM
  5. ARINC Source Switch - Still needed/Benefits?
    By dnelson in forum EFIS Installation Questions
    Replies: 4
    Last Post: 07-13-2010, 07:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •