Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: xm problems

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    I started this thread back in 2011. I tried three different hubs including the stein air. I finally resolved issue by getting rid of xm and going to navworx adsb. Works well.

  2. #2
    I have a SD 205 HUB in my RV-10 with XM weather, over 1000 hours with no problems.
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    I've been using XM via WXWORX for 4+ years and 550+ hours without issue. About a month ago I noticed I wasn't getting weather. I fly all the time, the most I have gone without flying is 2 weeks. My XM box green power LED will power on, but then power itself down after a few minutes. I spoke to WXWORX today and they said this was normal if they aren't getting data. They said I should "Put the WXWORX box in activation mode and send a refresh signal from Sirius/XM". Don't know how to put the box in activation mode. Is there a way to do this via AFS' software? Couldn't find anything in the AFS manual, and I don't have a WXWORX manual (and they don't either believe it or not). I have the AFS recommended Cisco hub and dual 4500s.

    Any help appreciated.
    Highest Regards,

    Noah F
    RV-7A
    Rhode Island

  4. #4
    Thanks for the update, Doug! I am also getting no signal connection. I have checked my antenna connection which is as good as ever, and sent a dozen refresh signals. Are we the only 2 remaining users of XM?? Let me know what you find!
    Highest Regards,

    Noah F
    RV-7A
    Rhode Island

  5. #5
    Quote Originally Posted by NoahF View Post
    Thanks for the update, Doug! I am also getting no signal connection. I have checked my antenna connection which is as good as ever, and sent a dozen refresh signals. Are we the only 2 remaining users of XM?? Let me know what you find!
    Yes, we might be the last left on earth! I talked to AFS yesterday and they really had no idea. But it is interesting in that our problems are essentially identical. I'm going to call WXWORX later today and see what they say.

    Doug

  6. #6
    Quote Originally Posted by dougweil View Post
    Yes, we might be the last left on earth! I talked to AFS yesterday and they really had no idea. But it is interesting in that our problems are essentially identical. I'm going to call WXWORX later today and see what they say.

    Doug
    Just talked with Vince at WXWORX and he had no specific solutions other than trying a new antenna before I send the WXWORX box back to them. My XM antenna is mounted under the cowling (this whole system has about 425 hours of use). He said antennas have been known to go bad. So I decided to get a new one so that has been ordered and I'll give it a try. Will let you know.

    Doug

  7. #7
    Great thanks Doug! When I spoke to WXWORX, they said I needed to put the box in activation mode and then do an XM refresh. How you enter activaiton mode, nobody knows. What's a new antenna cost? Is yours a Gen 1 WXWORX box?
    Highest Regards,

    Noah F
    RV-7A
    Rhode Island

  8. #8
    How did it work out Doug?
    Highest Regards,

    Noah F
    RV-7A
    Rhode Island

Similar Threads

  1. PocketFMS problems with 8.8.29
    By stickandrudderman in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 9
    Last Post: 11-05-2014, 12:39 PM
  2. Electrical Problems
    By Flying Kiwi in forum Technical Support Documents
    Replies: 8
    Last Post: 05-08-2013, 09:51 AM
  3. Problems Downloading Charts
    By art.pileggi in forum AF-5600 & AF-5500 General Discussion
    Replies: 4
    Last Post: 11-20-2012, 01:14 PM
  4. Arinc problems
    By Peter Edney in forum General Discussion
    Replies: 4
    Last Post: 08-05-2012, 02:33 AM
  5. Problems with latest software
    By garymail in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 8
    Last Post: 04-10-2012, 03:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •