Results 1 to 1 of 1

Thread: EFIS and AF-Pilot Pitot Static Connections

  1. #1

    EFIS and AF-Pilot Pitot Static Connections

    I'd just like to confirm that the pitot and static connections on both the EFIS *and* AF-Pilot are 1/8" NPT. Couldn't locate that info in the install manual.

    Also, confirm that these *are not* supposed to be included in the installation kit. Just wanted to be sure before I order some.

    Thanks!
    Last edited by schmoboy; 05-21-2011 at 08:51 PM.

Similar Threads

  1. AF-5600 & AF-Pilot no flight director, no EFIS steering
    By srwalter in forum AF-5600 & AF-5500 General Discussion
    Replies: 2
    Last Post: 12-16-2015, 07:25 PM
  2. Adsb to efis connections
    By rvdave in forum EFIS Installation Questions
    Replies: 2
    Last Post: 07-02-2015, 07:28 AM
  3. AF-5000 EFIS with GTN650,AF-Trans,AF-Pilot
    By Rob Hickman in forum AF-5000 Install Schematics
    Replies: 0
    Last Post: 01-29-2014, 02:52 PM
  4. EFIS/GPS auto pilot switch
    By RV7GUY in forum AF-5600 & AF-5500 General Discussion
    Replies: 1
    Last Post: 12-29-2011, 10:25 PM
  5. EFIS Serial Ground Connections
    By flickroll in forum EFIS Installation Questions
    Replies: 4
    Last Post: 03-15-2010, 02:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •