-
AF-Pilot & AF-GPS
I'm putting together a system with AF-6500, AF-Pilot, AF-GPS, & ARINC.
The AF-GPS will be the only GPS in the system.
My question is about the serial port on the AF-Pilot. Should I wire the
serial output of the AF-GPS to the AF-Pilot serial input? Will I have any issues
controlling the AF-Pilot with bugs and flight plans in the EFIS using
only the ARINC interface?
Thx,
- DanB
-
Advanced Flight Systems, Inc.
Dan, you should parallel into the RS-232 TX wire from the AF-GPS and run it into the autopilot. Otherwise everything will work just fine as far as bugs controlling the autopilot. The only limitation you will have is filing /G or conducting GPS approaches.
-
Thanks Trevor,
This is a VFR-only plane so I'm good to go.
- Dan
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules