Results 1 to 3 of 3

Thread: AF-Pilot & AF-GPS

  1. #1

    AF-Pilot & AF-GPS

    I'm putting together a system with AF-6500, AF-Pilot, AF-GPS, & ARINC.
    The AF-GPS will be the only GPS in the system.

    My question is about the serial port on the AF-Pilot. Should I wire the
    serial output of the AF-GPS to the AF-Pilot serial input? Will I have any issues
    controlling the AF-Pilot with bugs and flight plans in the EFIS using
    only the ARINC interface?
    Thx,
    - DanB

  2. #2
    Dan, you should parallel into the RS-232 TX wire from the AF-GPS and run it into the autopilot. Otherwise everything will work just fine as far as bugs controlling the autopilot. The only limitation you will have is filing /G or conducting GPS approaches.
    ---
    Trevor Conroy
    Technical Support
    Advanced Flight Systems
    Support@Advanced-Flight-Systems.com

  3. #3
    Thanks Trevor,
    This is a VFR-only plane so I'm good to go.
    - Dan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •