Results 1 to 2 of 2

Thread: Aoa install in RV10 with Duckworks lights

  1. #1

    Aoa install in RV10 with Duckworks lights

    What recommendations or issue are available regarding installing the Aoa in a RV10 wing that also has the Duckworks leading edge lights? It's the same outboard bay and I wonder if the light setup with affect airflow or interfere with the ports? Can the ports be moved in board slightly but remain in the same bay?

  2. #2
    If you put the ports in the location prescribed in the manual, they will not interfere with the Duckworks leading edge lights.
    ---
    Trevor Conroy
    Technical Support
    Advanced Flight Systems
    Support@Advanced-Flight-Systems.com

Similar Threads

  1. Fuel Calibration on RV10
    By darnold in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 1
    Last Post: 06-30-2013, 04:17 PM
  2. GTN-650 Install
    By MarkD in forum EFIS Installation Questions
    Replies: 6
    Last Post: 08-02-2011, 11:12 AM
  3. AOA Install Kit
    By CharlieWaffles in forum Installation Questions
    Replies: 1
    Last Post: 02-09-2011, 08:43 AM
  4. AOA Sensor Install
    By darylt57 in forum Installation Questions
    Replies: 2
    Last Post: 04-03-2010, 09:11 PM
  5. Two Audio outputs in a dual screen system? What about two warning lights?
    By gribbled in forum EFIS Installation Questions
    Replies: 9
    Last Post: 03-16-2010, 10:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •