AF-6600 Parallel GPS Serial

[MarginallyStable]

Looking through the documentation between Dynon HDX and AF-6600, Dynon says to connect the GPS in parallel to all displays. AFS recommends to tie to a single display and the displays sync data through Ethernet. I was curious if AFS supports connecting the GPS serial in parallel to all the displays to prevent a single display failure from causing loss of navigation functionality.

Thanks,

Craig

[Jonathon]

You can tee the SV-GPS-250/2020 to both AFS screens if you wish. You would want to leave the serial TX from the secondary EFIS display disconnected.