Results 1 to 2 of 2

Thread: AF-6600 Parallel GPS Serial

  1. #1

    AF-6600 Parallel GPS Serial

    Looking through the documentation between Dynon HDX and AF-6600, Dynon says to connect the GPS in parallel to all displays. AFS recommends to tie to a single display and the displays sync data through Ethernet. I was curious if AFS supports connecting the GPS serial in parallel to all the displays to prevent a single display failure from causing loss of navigation functionality.



  2. #2
    You can tee the SV-GPS-250/2020 to both AFS screens if you wish. You would want to leave the serial TX from the secondary EFIS display disconnected.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts