Results 1 to 3 of 3

Thread: Dynon autopilot tuning

  1. #1

    Dynon autopilot tuning

    AFS 5600 x 2, Dynon autopilot. Need to go through the autopilot tuning flowcharts in the AFS manual page 73. When flying to do this, can I bring up a split screen like on the Dynon HDX, that shows the the SV-servo calibration page on half and the airspeed, altitude, attitude on the other half? That way in the air I can go through each step in the flowchart. Otherwise I would have to land each time I wanted to change a parameter - sensitivity, gain, etc and then takeoff again to evaluate that one change.

  2. #2
    Figured it out. When flying to adjust the A/P parameters, go to SET, then AP/FD. Along the bottom of the screen is a button for each parameter to adjust while flying!
    rkurrle

  3. #3
    Works pretty well, doesn’t it!

    As great as it is to have the autopilot working well, I really enjoyed the tuning process.

    Bill

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •