I have the flat pack AF-Pilot Autopilot coupled to a 5600T EFIS display in my RV-10. Lately I have been getting the Max Airspeed warning when flying on the autopilot in what seems like random airspeeds nowhere near the Max AS value set within the EFIS. The Max AS value is currently set to 180 (Set -> AP/FD -> MAXSPD). I've tried setting it as high as 190 (95% of Vne) and as low as 165 (initial value). It seems the warning for Max AS pops up at times when the AC is in the 160-170 kts range even in straight and level flight. I'm assuming it is using the TAS value? Indicated is typically much lower anyway. Forget trying to descend using the AP.

If I press and hold the AP button on the Autopilot control head to access the lateral setup menu I do not see a value for MAX AS like the AFS-Pilot installation manual suggests. I just assumed that this version of the AP using the firmware for the AF-Pilot removed it?

Is there another setting I am missing?