Results 1 to 3 of 3

Thread: Landing warning override ....

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Landing warning override ....

    I have an "AFS Pilot" autopilot, which was installed by the builder 10 years ago in conjunction with the AFS4500 with in-wing ports for the AoA system. When the 4500 died, I replaced it with a 5400 which uses the pitot for AoA through the SV-ADAHRS to the 5400 via the SV network.

    I see recurring warnings around the web regarding the "Landing Warning Override" configuration setting. The warning states that the setting for "Landing Warning Override" should be 8 for in-wing pressure ports are used, and that I should now change that setting to 1.0 since I'm now getting that info from the pitot.

    Is this setting change still recommended in my situation? I ask because the current setting for Landing Warning Override, which was carried over by AFS from the 4500, is set to 45, not 8.

    Gotta be honest, I don't even know what the Landing Warning Override is.
    Last edited by MacCool; 06-20-2022 at 08:49 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts