Results 1 to 3 of 3

Thread: G5 providing backup ADAHRS data

  1. #1

    G5 providing backup ADAHRS data

    Hi

    On page 31 of the AF-5000 Pilot Guide, it says that the

    "AF-5000 can be connected to a Dynon SV-200 Primary, SV-201 Backup ADAHRS using the Dynon SV-NETWORK and a backup EFIS (Garmin G5) that can provide ADAHRS data on a separate RS-232 serial connection."

    Has anyone done this...used the G5 as a source of backup ADAHRS info? Any insight as to how best to wire it? (I have a single 5600 and an ACM.)

    Thanks,
    Glen

  2. #2
    I used this diagram from AFS and it worked fine. Name:  G5 set up copy.jpg
Views: 36
Size:  21.9 KBName:  G5 to 5600 wiring copy.jpg
Views: 35
Size:  20.5 KB

  3. #3
    On a single AF-5600 ACM system, the only potentially free serial port is going to be serial #1, which, if not already in use by a remote audio panel, would be free to use for the G5 backup ADAHRS function. You can access PFD#1 through pins 12/25 on the ACM Audio panel connector.

    70080 ACM-ECB Serial Port Diagram Dip Switch.pdf

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •