Results 1 to 2 of 2

Thread: Oil and Fuel pressure VDO sensors

  1. #1

    Oil and Fuel pressure VDO sensors

    Anyone know the correct ohm range for the Oil and Fuel pressure VDO sensors running on an AFS-3500 s-type and a Lycoming YIO-360-M1B? I found a VDO oil pressure sender 0-145 psi 10-184 ohms w/11 psi low alarm switch 1/8”-27 NPT coming in the mail. The fuel sensor is acting up too again. Need to get the right replacements
    Last edited by timotb; 10-07-2021 at 10:33 AM.

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    They should be the 10-180Ω you have selected. We don't normally use the alarm switch versions but if you have a need then go for it.

    We do have the sensors in stock for Oil, Injected Fuel, and even Carbureted Fuel pressures. 503-263-0037 x 2
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •