-
Flaps Position Indicator & AOA readout
Running an Advanced ACM panel with 5600 screens. Flaps controlled by stick switch and screen buttons. I just updated to SW version 16 with no change to my issue. The Flaps operate correctly with position operation, continuous retract.
The position indicator on the screen starts a no flap then at position 2 shows 96% then position 3 - 75% then at full down 100%..
The AD value moves as expected through the deployment but the % and screen do not reflect the movement. It is seeing 100% at 2 locations through movement - once at AD value 29 then again at full down. Any ideas on what I need to change?
Pos. Flaps. AD_value. %
1. Reflex. 4. 0
2. 0 deg. 26. 96
3. 20 deg. 124. 75
4. Full Dn. 246. 100
Regarding AOA The donut indicating Flaps down shows at 0 deg in my case. Is is possible to change setting so it indicates Flaps down beyond position 2?
AOA shows up correctly, but I am not getting any activity through flight other than the donut appearing - no change in bars, window numbers or messages. Just showing “000” in the window. Have checked the pitot/static/aoa lines.
Any thoughts?
Last edited by Bgill; 05-07-2021 at 12:57 PM.
Reason: Lost the last line.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules